| Weight | 2 kg |
|---|---|
| Color | |
| Material | |
| Height mm |
Kitchen mixer tap with hand shower BLANCO CHOICE LUNEOO-S SENSOR, stainless steel/PVD steel
BLANCO CHOICE LUNEOO-S Sensor Mixer Tap with Hand Shower
Filtered chilled, up to 100° hot, and carbonated water, as well as hot and cold still water (only with the CHOICE.ALL water treatment unit).
Separately, a simple-to-use two-button interface allows the selection of precise quantities of filtered and regular water using a measuring button.
The agitator rotates 360°.
It is not suitable for installation on sinks with a tap ledge (tap plate).
The mixer can be installed on a standard worktop with a depth of 650 mm, recommended worktop depth is 700 mm.
Safety mechanism for boiling water hazard management.
Prepared for connection to a 100-240V power supply.
Requires only a balanced high-pressure water supply, minimum pressure 1.0 bar.
A Ø35 mm hole and 2 x Ø45 mm holes are required for the mixer and mixer control unit.
The mixer buttons require a 230V electrical connection.
Please follow the installation instructions carefully when making the cut-outs for the control unit and the mixer tap, as they are not collinear.
Included:
– Mixer
Buds
– Accumulators and batteries
Recommended to combine with the OVALON sink.
Stainless steel
Finish: PVD brushed steel
Plate 74 aluminium ''channel'' wheel complete for one door (16-19mm) D50mm, 70kg, SLOW, black
Round wardrobe rail Ø28 mm L2350 mm, aluminium/matt (PU10)
Base plate 'Serie 04' 150 mm Ø30 +15-5mm, plastic/black
Leg bracket 'Serie 04.R' 100-150 mm Ø30 +55-5mm, plastic/black
Wardrobe rail Ø28 mm L2350 mm, aluminium/black (PU10)
Vertical post WALK-IN L2606 mm, aluminium/silver (PU 10)
Mounting plate X91 H2 without screws, nickel (PU 200)
Push to open pusher LONG, reg. 80mm, with magnet, anthracite
"Push to open" pusher LONG, reg. 80mm, silicone/anthracite
Construction profile 22x22mm L3500 mm, aluminium/silver anodised
Mounting plate X91/X92 H0 with eccentric and euro screws, nickel (PU 200)
Conical foot 'Serie 21' 150 mm Ø35 +20-5mm, plastic/black
Plinth leg BONE 150-165-180 (149-190mm), black
Construction profile 22x22mm L3500 mm, aluminium/gold anodised
Hinge mounting bracket 3D LUGO/TORINO/YENKA, right, zinc/green
Construction profile, single-sided, 22x22mm, L3500mm, aluminium/stainless steel anodising
Hinge mounting bracket 3D LUGO/TORINO/YENKA, left, zinc/green
Construction profile, single-sided, 22x22mm, L3500 mm, aluminium/black anodised 













