Waste system BLANCO sorter SELECT II 60/2 Orga 600mm cabinet with drawer, 2 buckets 1×19+1x30L
267,98 € + km
BLANCO SELECT II 60/2 with drawer.
Collection, sorting, tidying – Waste sorting system (waste disposal system) for cabinets with a pull-out front panel.
Full use of space in the sink cabinet thanks to custom solutions that harmonise with the sink and tap.
All details are easy to clean thanks to the large and smooth surfaces.
Rubbish bins: 1×19 + 1x30L
Installation tip:
Installation height 458 mm, installation depth 400 mm, due to drawer runners, an internal cabinet depth of 450 mm is required.
Pay attention to the positioning of the handles.
The design should take into account the installation height of the waste sorting system, the installation depth of the sink and the resulting minimum dimensions of the bottom cabinet.
Minimum recommended plinth height when installing the Blanco MOVEX pedal: 100 mm.
Also suitable for installation with frames/profiles from 40 mm width.
In stock
Delivery 0-3 working days
Hinge Blum Clip Top Blumotion 110° opening/overlay/screw fixing/Blumotion/nickel plated
Hinge Blum Clip Top Blumotion 110° opening/overlay/screw fixing/Blumotion/Onyx black (black)
Profile DIVA5 21x9.3x16 mm L2020 mm, aluminium/black
End supports LUXE kit for wardrobe rail, right&left, zinc/silver (PU10)
Handle profile Sharp 19 mm, 2.7 m, Placard 74 aluminium/silver matt (PU8)
Sahtlikomplekt VERTEX 3D H131/300mm, 16mm 40kg SOFT, teras/valge
Profile DIVA5 21x9,3x16 mm L2020 mm, aluminium/silver
Zero floor/or ceiling mount (square), metal/plastic/black (PU 16)
Central support (through) for wardrobe rail, adjustable height, Ø25 H90-115mm, aluminium/matt black
End support for wardrobe rail, adjustable height, Ø25 , H90-115mm, aluminium/ matt black
Surface adaptor for P2O pusher 76.5 and 80mm, anthracite
Handle profile Sharp 19 mm, clamp for 1 hinged door 2.35 m, aluminium/black matt (PU1)
Kitchen sink Blanco ETAGON 500-U 530x460, M60, InFino, Silgranit/Black
Mounting plate X91 H0 with euro screws, nickel (PU 200)
Wardrobe lift HANG A600-830 mm, max 12kg SLOW OPEN, steel/black finish
Sahtlikomplekt VERTEX 3D H131/500mm, 16mm 60kg SOFT, teras/valge
Placard74 Handle profile Sharp 18mm, 2.9 m, aluminium/black matt (PU8)
Zero set, 1 x wooden shelf support, 1 x module support and 1 x wardrobe rail 1000mm, aluminium/black
Tualettpaberihoidja Dijon (kaanega), kroom
Kinnitusplaat X91/X92 H2 reg. eksentrikuga ja eurokruvidega, nikkel
Tualettpaberihoidja Cannes (ilma kaaneta), matt must
Rätikuhoidja Cannes L490, kroom
Rätikuhoidja Dijon L580, kroom
Seinanagi Cannes 2 nagiga, kroom
Ümar riidepuutoru Ø25mm L1000 mm, teras/matt must struktuurne
Kinnitusplaat X91/X92 H4 kruvideta, nikkel (PU 200)
Lõppotsikud (otsakatted) HANK katteprofiilile, plastik/hall (kmpl=2 tk)
Seinanagi Cannes 4 nagiga, matt must
Rätikuhoidja Dijon L580, roostevaba teras
Mounting plate X91/X92 H0 with eccentric and euro screws, nickel (PU 200)
Mounting plate X91 H2 with euro screws, nickel (PU 200)
Handle profile Wave 19mm complete for 1 door 2.7 m, aluminium/silver (PU 1)
Wire basket HACK B-482mm with frame 560 - 594 mm (M60), SOFT, steel/black (PU1)
Seinanagi Cannes 4 nagiga, kroom
Tualettpaberihoidja Dijon (kaanega), roostevaba teras
Seinanagi Dijon 3 nagiga, matt must
Aluminium/wood profile for glass sliding doors 12+4 (40mm x 16 mm), 2350mm, aluminium/silver (PU 8)
Lükandsüsteemi HANK ja RAILWAY alumine U-profiil 2m ukse alaserva, alumiinium (PU 5)
Adapters for HACK frame mounting to Zero vert.post, steel/black (PU 2)
End ceiling support VANO (2pcs) for wardrobe rail, 75 x 20 x 10 mm, aluminium/titanium
Seinanagi Dijon 4 nagiga, matt must
Rõivalifti HANG distantsplaat, plastik/hall
Universaalne raam HACK 760-794mm (M80) B683mm, D450 mm, SLOW, alumiinium/kivihall (PU2)
Seinanagi Dijon 4 nagiga, roostevaba teras
Sahtlikomplekt VERTEX 3D H131/400mm, 16mm, 40kg SOFT, teras/antrasiit
Kitchen sink Blanco SUBLINE 500-U 530x460mm M60 InFino, Silgranit/black
Drawer set VERTEX 3D H131/450mm, 18mm 40kg SOFT steel, anthracite
Sliding system SPACE+ inner door left set for three doors, reg. 0/+4 mm, max weight 85kg
Push to open pusher SHORT, reg. 50mm, silicone, grey
Pull-out and lift-up table rails OPLA Folding+39, max L370mm, max 40kg, RST/aluminium/matte
Mounting plate X91 H2 without screws, nickel (PU 200)
Wire basket HACK B-482mm with frame 560 - 594 mm (M60), SOFT, steel/stone grey (PU1)
Rätikuhoidja Dijon topelt L580, kroom
Seinanagi Cannes 1 nagiga, matt must
Upper & lower ST Placard 74 guide rail set 2.35m aluminum/white (PU 1)
Rätikuhoidja Cannes topelt L640, kroom
Tualettpaberihoidja Dijon (kaanega), matt must
Handle profile Placard 74 Sharp 16, L2.7 m, aluminium/gold (PU8)
Placard 74 GROOVE lower accessory set for one door, up to 50kg SOFT
Sahtlikomplekt VERTEX 3D H131/350mm, 16mm 40kg SOFT, teras/valge
Rätikuhoidja Cannes L490, matt must
Seinanagi Dijon 3 nagiga, roostevaba teras
Tagavara tualettpaberihoidja Cannes, kroom
WC hari Cannes hoidjaga, matt must
Seinanagi Cannes 2 nagiga, matt must
Nurgariiul klaasiga Cannes, kroom
Tagavara tualettpaberihoidja Cannes, matt must
Varuharjas WC harjale Cannes, valge
Riidepuutoru ZERO LUXE kandiline L750mm (2* toru/4* o.kandur), alumiinium/must
Fixing plate X91 H0 with eccentric and wood screws, nickel (PU 200)
Nurgariiul klaasiga Cannes, matt must
Corner support LUXE for wardrobe rail, zinc/black (PU 20)
Zero module (drawer box) support kit, zinc/black (PU 5)
Kinnitusplaat X91/X92 H4 eksentrikuga ja eurokruvidega, Titanium (must) (PU200)
Universaalne raam HACK 760-794mm (M80) B683mm, D450 mm, SLOW, alumiinium/must (PU2)
Converter 100-240VAC 60W 12VDC 4A IP67 145 x 55 x 35mm, grey
Sahtlikomplekt VERTEX 3D H93/500mm, 16mm 60kg SOFT, teras/antrasiit
End support LUXE for wardrobe rail, right & left (pair), plastic/silver (PU20)
Tualettpaberihoidja Cannes (ilma kaaneta), kroom
Sahtlikomplekt VERTEX 3D H131/500mm, 16mm 40kg SOFT, teras/valge
Power rail Lite Track 24V L1000mm, black (2 pcs)
Handle profile Sharp 16 mm complete for 1-panel door 2.7 m, aluminium/silver matt (PU 1)
LOFT sliding door hardware kit for 1 to 2m wide door, steel/black (PU 1).
Laekandur (lõpp) ELEGANCE ümarale riidepuutorule Ø25 mm, H78 mm, teras/kuldne
Waste system BLANCO sorter SELECT II 50/2 500mm cabinet, with 2 buckets 2x19L
Converter 24V 15W 6-pole splitter and power cable with Euro plug connector
Mounting plate X91 H0 without screws, nickel (PU 200)
Mounting plate X91 H0 with eccentric and wood screws, Titanium (black)
BLANCO MOVEX Foot Pedal, stainless steel finish 










